Which adapter do I need for my Baby Jogger City Select Stroller?
Sometimes, choosing an infant seat and stroller can seem like a daunting task. There are so many options on the stroller market today – do you want a jogging stroller, simple frame, one that expands, a double, an umbrella stroller, a compact stroller, and the list goes on. How do you figure out which adapter you need to make your car seat and City Select stroller a travel system? We’ve compiled a brand specific list for you to help you make the right decision. Keep in mind that your car seat adapter will always be the same brand as your stroller, and will then be compatible with your specific brand of car seat. There have been some changes in their adapter world the past few years so check out their chart at the bottom!
Why a City Select or City Select Lux?
The City Select, City Select LUX and City Select 2 by Baby Jogger are AMAZING strollers. They are one of our favorites! They can be a single frame, a full-size stroller and expand into a double or even triple (when using the glider board or bench seat). Lucky for you, it is compatible with a multitude of major car seat brands as well.

CITY SELECT CAR SEAT ADAPTERS
Car Seat Adapter for BRITAX Car Seats:
If you have a Britax Infant Car Seat mentioned below,
- B-Safe
- B-Safe 35
- B-Safe 35 Elite
…you need THIS ADAPTER.
City Select/LUX car seat adapter for Britax [2014204 or 2151253 depending on car seat model].

Adapter for CHICCO or PEG PEREGO car seats:
If you have a Chicco or Peg Perego Infant Car Seat mentioned below,…you need THIS ADAPTER.
City Select/LUX car seat adapter for Chicco and Peg Perego [1967207].

Adapter for CYBEX, NUNA or MAXI COSI car seats:
If you have a Cybex, Nuna or Maxi Cosi infant car seat mentioned below…you need THIS ADAPTER:
- Cybex infant car seat (Aton and Aton Q)
- Maxi Cosi (Mico AP and Mico Max 30)
- Nuna Pipa infant car seat
City Select/LUX car seat adapter for Cybex, Maxi Cosi and Nuna [2013551].

Adapter for UPPABABY car seats:
If you have an Uppababy Mesa infant car seat, unfortunately, THIS ADAPTER has been discontinued.

Adapter for BABY JOGGER and GRACO Car Seats:
If you have a Baby Jogger or Graco infant car seat mentioned below …you need THIS ADAPTER:
- Baby Jogger City Go
- Baby Jogger City Go 2
- Baby Jogger City Go Air
- Graco Click Connect (30, 35 or 35 LX)
City Select/LUX car seat adapter for Baby Jogger and Graco [1967362]. NOTE this adapter works for the Graco CLICK CONNECT series only.

Need Adapter S.O.S.?
If you need any help deciphering your adapter, are unsure which one to get, or just don’t see your car seat listed above, please comment on this blog or email us at rachel@baby-logic.com. We are more than happy to help you! We LOVE talking gear!
Compatibility Chart
Here is the chart provided by Baby Jogger also that includes all compatible adapters for specific car seats and their entire stroller line.
Car Seat Compatibility Chart for Strollers Manurfactured 2019 and NEWER:

Car Seat Compatibility Chart for Strollers Manufactured BEFORE 2019:

Want More?
Here’s a few other blog topics to give you peace of mind and help you make a great decision regarding your baby gear!
- Which car seat adapter do I need for my BOB stroller?
- EXPERT PICK: Baby Logic’s TOP 7 BEST infant car seats.
- When should I upgrade my child’s seat?
- DR. RACHEL’S PICK: TOP 4 BEST baby monitors.
Very valuable information, it is not at all blogs that we find this, congratulations I was looking for something like this and found it
here.
Best regards,
Abildgaard Dencker
Hello I was wondering what kind of adapter would I need for Graco sungride sunglock 35 DLX infant car seat..Thank you.
Hi! At this time, Baby Jogger only makes a compatible adapter for the Graco Click Connect. This is that adapter: https://amzn.to/2KFOjzA
Child restraints could be recalled for safety reasons. You MUST register your child seat to be reached in a recall.
Hello! Thank you so much for this information. So helpful! I was wondering if the Cybex Anton adapter will also work for the Cybex Cloud Z I size infant car seat?
I was able to find the correct adapter-because is your post!. You can disregard my question 🙂 thank you so much for this info . So so helpful!!!
So good to hear this was helpful!
Could you tell me if the adapter listed for the chicco carseat would also work for the double mini city select? I know that it works for the single but wasn’t sure if it works for the double… Thanks!
Hi Carli! Do you have the City Mini Double stroller (Side by side)? If so, there is no adapter currently for Chicco. If you have a City Select, and want to make that a double – then you can use the Chicco adapter listed in our blog 🙂
Does the Graco snugride snucklock 35 DLX click connect car seat fit on the City Select Lux with the graco adapter?
According to the Baby Jogger website, the following seats are compatible with the Graco Adapter:
SnugRide Click Connect 30
SnugRide Click Connect 35
Snugride Click Connect 35 LX
Snugride Click Connect 40
Some people have found success with other Graco seats but this is what the manufacturer recommends and what they tested.
What adapter would I need for my Evenflo infant car seat? I have looked everywhere and I’m hoping I can make it work. I really love the car seat I purchased for my double city select.
Hi Sarah! Thanks for reaching out! Unfortunately, Baby Jogger doesn’t make an adapter for your Evenflo car seat….yet. It’s such a bummer that they discontinued their universal adapter years ago. I hope they bring that back. Your could get a City Select bassinet to use in the meantime, although you do lose the convenience of having a travel system. Here’s the link in case: https://amzn.to/3kKnmca
Hi! I was wondering if anyone knew what adapter to get for a Baby Trend Click Connect infant carrier, for my City Select? I’m getting induced this Saturday and now freaking out!
Hi Christine! Thanks for reaching out! Unfortunately, Baby Jogger does not make an adapter for Baby Trend car seats! Huge bummer! Your best bet would be to get the City Select/LUX bassinet to use in the meantime to stroll with your little. You do lose the convenience of a travel system though. Here’s a link: https://amzn.to/3kKnmca
I have a city select stroller and a baby trend car seat. Is there an adapter for that?
Hi Lyndsay! Thanks for reaching out! Unfortunately, at this time, Baby Jogger does not make an adapter for the Baby Trend line of car seats. Such a bummer!
I have an older city select double stroller jogger and need an adapter for Graco SnugRide SnugLock Extend2Fit 35 Infant Car Seat
Hi Brenda! At this time, the Graco adapter is not available on Amazon, not sure why. Here is the link to the manufacturer directly. It is compatible with the CLick Connect models and all newer Graco seats have the Click Connect system, so you should be good. Here is that link: https://www.babyjogger.com/accessories/baby-joggergraco-car-seat-adapters-for-city-select-and-city-select-lux-strollers/SAP_1967362.html
Is there an adapter for the city mini double stroller for evenflo car seats and if so, will that same one fit graco click connect?
Hi Wendy! At this time, Baby Jogger does not make an Evenflo car seat adapter. Currently, the only car seats compatible with the City Mini Double are Maxi Cosi, Cybex, Britax, Baby Jogger and Graco. This adapter: https://amzn.to/3oWuyVW is compatible with your Graco car seat and your City Mini double though.
We have baby trend carseat already. Is there an adapter out there that we can use with a baby jogger city mini double?!
Hi Lyndsey! Thanks for reaching out. Sadly, Baby Jogger does not make an adapter for the Baby Trend Car seat.
I have a baby jogger city go carseat and am wondering what compatible strollers there are?
Hi Shannon! That’s a great car seat. Most Baby Jogger strollers will be compatible including: Summit X3, City Mini GT2, City Select, City Select LUX, City Tour and City Sights. At this time, not many other strollers make adapters for the Baby Jogger series of car seats but if you love a particular stroller, just double check its compatibility list 🙂 If you have any other questions, let me know!
I would recommend the Baby Jogger City Select Car Seat Adapter for use with the Baby Jogger Stroller.